FREE SHIPPING! On Orders Over $80 [ Weekend Only]

FIND MORE PRODUCTS ON LIGHTONLINE Head to our SALE! section... View More on SALE! Blog - Energy Saving! Energy Saving Light Bulbs

High Performance ReneSola 10W SMD LED Downlight Dimmable Warm white

High Performance ReneSola 10W SMD LED Downlight Dimmable Warm white

$15.40

(prices including 10% GST)

• High performance SMD LED with  integral driver
• High lumen output efficiency
• Dimmable: Compatible with most leading edge, trailing edge and C-Bus dimmers
• Long lifetime 50,000 hours
• IP protection: IP 44
• IC-F Approved & suitable for covering or abutting with building insulation
• Over all size: Diameter 115 x 58 mm
• Cut out size: Diameter 90 mm
• Complete with 1.2 meter flex & plug

More Lighting blogs and LED Downlights are available at LightOnline.

Colour Temperature	Warm White 3000K
Dimmable	Yes
Volts	220 - 240V
Finish	White
Watts	10W
Bulb Type	SMD LED
Lumen	850 lm
Dimension	90mm cut out
Life	50,000 hrs
Beam Angle	90D
Other Code	Luxor LED Dimmable Downlight
Lamp Application	Replacements for conventional light sources for both residential and commercial applications.

Life span of different light bulbs - How long they last?

Let's have a closer search at how incandescents, fluorescent tubes, HIDs and LEDs identify their durability

The life span hours of a light bulb could be a important element when deciding whether you want to obtain a specific type of lighting. Life hours or endurance could be confirmed in other ways, based on the bulb in question. Let's have a closer search at how incandescents, fluorescent tubes, HIDs and LEDs identify their durability based on various testing methods.

Incandescent Bulbs

Based on Used Illumination Engineering, “The scored living of incandescent lamps is the idea at which 50% of an much large group of lamps could have failed.” For example, state you've a sample of 100 of the same type of incandescent light bulbs. Once the 50th bulb blows, this would establish the charge of living for that specific incandescent. Compared to different sources of light, incandescent bulbs have a significantly shorter endurance, with typically 1200 hours.

Fluorescent Tubes

Testing for fluorescent tubes is fairly different than incandescents. While the scored living for fluorescent lamps is at the idea that 50% of a mass volume of lights have unsuccessful and the continuing bulbs are however using, you will find different facets to take into account, particularly: burn up time, emission substance, and ballast type.

Burn off Time: The life span of a fluorescent is based on lights being on for 3 complete hours, then down for 20 minutes, and eventually on again for another 3 hours. In a large set of fluorescents, state 100, when the 50th bulb burns out calculate the 3 hour amounts of time and a typical F32T8 fluorescent tube continues 30,000 hours. But, it the burn up time for this same type of lamp is improved from 3 to 12 hours, the lamp will last longer, nearer to 36,000 hours. This is because when fluorescents burn more consistently for longer amounts of time less emission substance is lost, enabling an extended life. But what precisely is emission substance?

Emission Stick: Positioned at equally stops of the fluorescent tube you will discover a cathode protected with white emission substance or emissive materials. It ought to be noted that a cathode appears similar to the filament found on an incandescent bulb. Every time you switch on a fluorescent tube, emission substance begins to travel down the cathode. Once the emission substance has been reduced from the cathode, this signifies the end of living and the tube burns out. Due to this the longer the tube is left on, the less emission substance darts down and the longer the tube lasts.

Ballast Form: In order for fluorescent tubbing to operate, they might require ballast. Ballasts generate the electricity needed to start fluorescent tubes. There are numerous various ballasts to select from which start and operate fluorescent tubes in various ways. For example, quick start ballasts use less electricity throughout operation but start the lamp with a top voltage jolt of electricity. This significant jolt of electricity causes a wide range of emission substance to travel down the cathodes, creating a tube scored for 30,000 hours to last just 24,000 hours, a twenty years living reduction.

Rapid start ballasts use more electricity in operation but gives a smoother start first shortly warming the cathodes before the fluorescent tube turns on. Consequently, less emission substance flees the cathodes and the tube continues the scored 30,000 hours. Program quick start ballasts provide a level smoother start with first detecting how hot the cathodes are and giving sufficient electricity to turn the tube on. (The cathodes in a tube which was just turned off will soon be warmer compared to the cathodes in a tube that is been turned off for a day.) Due to the less unpleasant approach to setting up the tube, hardly any emission substance is lost resulting in a longer living compared to the 30,000 hours listed.

HIDs

Large Power Launch (HID) lamps can be found in a variety of forms, but the primary ones in use nowadays contain probe start metal halide, heart start metal halide, and large pressure sodium. The metal halide forms start out by having an abundance of light, but reduce around a period of time.

lot of light, but the light decreases a lot around time. Therefore, metal halide living is defined as the idea at which the light bulb offers 60% of their initial light output. For example, for a standard 400 watt metal halide light bulb that could be 20,000 hours. The light bulb's functioning position also influences living: they supply more light and keep going longer when they're run in vertical (up-and-down) positions. If the same 20,000 hour light bulb is run in an outside (side-to-side) position, it will simply last 15,000 hours.

Large pressure sodium light bulbs are different. Their chemistry improvements with time, therefore that a common large pressure sodium light bulb begins turning down and on or “cycling” at 24,000 hours. When the light bulb begins cycling this means that the bulb has achieved their endurance and needs to be changed.

LEDs

LEDs are tried for performance in several ways. LM-79 is among the approved methods for testing that steps electric power, usefulness, light distribution, light intensity, and chromaticity of LED-based products such as light bulbs and luminaires. It ought to be noted that light bulbs or luminaries could be different. A light bulb typically has a foundation of some kind and is known as a replaceable light source whereas a luminaire is really a fixture, and with the light bulb inside. The language may usually be used interchangeably.

Even though LM-79 screening doesn't check living of an LED, it does check for the initial efficiency or light output of LED luminaries and light bulbs. This form of initial efficiency screening pieces the stage for the following variety of LED analysis.

LM-80 screening methods the light output of the actual light emitting diodes (LED's) which are designed in to LED light bulbs and luminaires. By screening the light output every 1,000 hours for 6,000 – 10,000 hours, you can establish how much light will be lost (or fade away) around time. By connecting the light output “dots” at 1,000 hours, 2,000 hours, 3,000 hours, etc. on a graph, a lumen preservation “curve” could be drawn for the initial 6,000 – 10,000 hours of the light emitting diode. The life span of a light emitting diode or an LED-based light bulb or luminaire is normally defined as the point in time once the initial light output determined in LM-79 screening has lowered by 30% to 70% of its initial level. That point in time is known as “L70 life.” The issue, nevertheless, is that most light emitting diodes and LED-based light bulbs and luminaires last 50,000 – 100,000 hours or more. Since LED lighting manufactures can not wait 50,000 – 100,000 hours to determine living of the solution before getting it to promote (there are merely 8,760 hours in annually!), they want a method to add more “dots” to the LM-80 lumen preservation “curve” and establish when as time goes on their light emitting diode, LED-based light bulb, or luminaire can achieve 70% of its initial light level (L70 life). The TM-21 screening technique requires the info collected in LM-80”dots” and runs that knowledge in to the near future applying complex mathematical evaluation and formulas.

Just like there's more to an automobile than a motor, there's more to an LED-based light bulb and luminaire than the light emitting diode. If the brakes on your vehicle crash when you are traveling 70 miles each hour, your vehicle might not last considerably longer! In a similar way, other parts of the LED-based light bulb and luminaire are very important and should be considered. If, as an example, the capacitor built into the driver of an LED-based light bulb fails, that LED light bulb can go wrong even although the actual light emitting diode still has much light to give.

While LM-79, LM-80, and TM-21 screening provides a good estimate of just how long a light emitting diode can work before it reaches L70 life (at 70% of its initial light output), the LED-based light bulb or luminaire all together (including the caliber of its personal components) is highly recommended when calculating its life.

Although light bulb endurance isn't completely cut and dry, understanding the different screening techniques used to calculate performance is vital. Whether you are highlighting your home or office room, you should be aware of just how long your bulbs will last. What've some of one's experiences been with light bulb life hours? As always you can decline people a range on our contat section to date=june 2011 further.

Promo

LED lighting bulbs in Melbourne, LED light globes in Sydney, Buy LED light bulbs in Perth, LED lighting bulbs in Darwin, LED downlight bulbs in Canberra, LED lighting bulbs in Brisbane, LED lighting online store in Queensland, Buy LED light bulbs online in Sunshine Cost, LED light bulbs stores in Adelaide, Buy online LED light bulbs in Newcastle, LED lighting globes in Wollongong, LED light bulbs online in Logan City,online LED light bulbs stores in Gold Coast

Press Release: Life span of different light bulbs - How long they last?

Philips Master LED Spot LV AR111 15W 24D Warm White

• Patented intelligent driver
• Lifetime of 40,000 hours
• Low energy consumption (energy saving globe, 15W = 75W standard globe)
• Clearly defined beam spread
• UV- and IR-free light for less heat and protection for heat-sensitive objects
https://www.lightonline.com.au/led-miscellaneous-lights/philips-master-led-spot-lv-ar111-15w-24d-warm-white

Colour Temperature	Warm White 2700K
Dimmable	Yes
Energy Saving	Yes
Base	Lamp Base G53
Volts	12V
Finish	Satin Chrome
Watts	15W
Bulb Type	AR111
Lumen	800 Lm
Dimension	56 x 111 mm
Life	40,000 hrs
Beam Angle	24D
Other Code	PHILIPS MASTER LEDspot LV AR111
Lamp Application	Shops, hotels, restaurants, bars, cafés, galleries, museums, exhibitions, lobbies, corridors, stairwells, washrooms, reception areas

LightOnline Blogs:
How to choose the right LED light bulb for your Fixtures
Online light bulb buying guide for choosing right LED light globes

3 Latest light bulb lamps for replacement in LED lighting you may be interested in coming days!

We hold the latest light bulb lamps in LED you may be very interested in coming days to replace with your old halogen or incandescent lamps. All the LED lamps coming newly in market can retrofit with your older fittings. On top of that the LED lamps are durable and cost you much less on energy bills.

Let's see what are the options currently we have in different categories

1. Verbatim 5Watt candle bulbs in LED E27 Ediscon Screw holder 3000K Warm White Clear - 5W

This verbatim LED candle bulb comes with an amazing finish and perfection inside out. It is a perfect  fit for chandeliers and your decorative light fittings. The Verbatim 3000K Candle LED bulb is a high-quality, energy efficient 32-watt replacement for incandescent candle lamps. With a warm, 3000K colour temperature, and smooth, streamlined exterior, the Candle LED bulb is ideal for chandelier and wall sconce fixtures.This lamp has an estimated lifetime of 20,000 hours, resulting in reduced maintenance and replacement costs when compared to incandescent bulbs.

Features

- Replacement for 32W incandescent Candle lamp
- Clear Dome
- Clear light guide for creating starry effect of incandescent lamp
- E27 lamp base
- Lifetime of 20,000 hrs
- Non-dimmable
- 86% Energy Saving
 
 

2. High Performance ReneSola 10W SMD LED Downlight Dimmable Warm white

Another amazing addition to our product line is Renesola SMD LED Downlights. This is one of the fast moving product in this month and received many customer's attention to this emerging brand. The price cap is a notable point when it comes to downlights with Diffuser's and this quality finished product is worth mention

Features

• High performance SMD LED with  integral driver
• High lumen output efficiency
• Dimmable: Compatible with most leading edge, trailing edge and C-Bus dimmers
• Long lifetime 50,000 hours
• IP protection: IP 44
• IC-F Approved & suitable for covering or abutting with building insulation
• Over all size: Diameter 115 x 58 mm
• Cut out size: Diameter 90 mm
• Complete with 1.2 meter flex & plug
 
 

3. Energetic A67 LED GLS globe 13Watt Dimmable Warm white Edison screw E27 / Bayonet Cap opal light Bulb

Another LED GLS SupValue globe worth mentioning is Energetic A67 light bulb, one of the top wattage options in this range and presenting with a very good bulk price range we have Bayonet Cap and Edison Screw base lamps in this product. The globe itself is high-end with a perfect finish and a beauty to look at. Let's see its features here

Features

- Operating Frequency: 50/60Hz for non-dimmable lamps; 50Hz for dimmable lamps
- Switch Times=20000
- Watt. Equiv.=Wattage equivalence to incandescent bulb.  
- Lumen Maintenance Factor ≥0.7
- Color Consistency ≤6SDCM
- Instant light


Read the full post here

3 Latest LED light globes you may be interested in coming days!

Only $15.40 for LED Downlights - Cheap LED downlights Renosola 10W SMD LED Downlight Dimmable Warm white

• High performance SMD LED with  integral driver
• High lumen output efficiency
• Dimmable: Compatible with most leading edge, trailing edge and C-Bus dimmers
• Long lifetime 50,000 hours
• IP protection: IP 44
• IC-F Approved & suitable for covering or abutting with building insulation
• Over all size: Diameter 115 x 58 mm
• Cut out size: Diameter 90 mm
• Complete with 1.2 meter flex & plug

Only $15.40 for LED Downlights - Cheap LED downlights Renosola 10W SMD LED Downlight Dimmable Warm white

Colour Temperature	Warm White 3000K
Dimmable	Yes
Volts	220 - 240V
Finish	White
Watts	10W
Bulb Type	SMD LED
Lumen	850 lm
Dimension	90mm cut out
Life	50,000 hrs
Beam Angle	90D
Other Code	Luxor LED Dimmable Downlight
Lamp Application	Replacements for conventional light sources for both residential and commercial applications.